IFD5XX/4XX Compatible Equipment
The IFD5XX/4XX can interface with a host of other avionics equipment. The following list represents proven interfaces. There may be other devices that can be configured the same as one on the below list but Avidyne has not tested it and can therefore not make any compatibility claims. This information is FOR REFEREN…
IFD Interface with JPI EDM900/930
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD Interface with JPI EDM900/930
GPS Rollover Update Information for Dealers
IFD5XX/4XX AT 10.2.X or Higher For IFD5XX/4XX currently at S/W Version 10.2.X or higher you can obtain the GPS Rollover Software at: Additionally, you can obtain the Service Bulletin for this upgrade at: IFD5XX/4XX AT 10.1.X If your IFD is currently at a 10.1.X or less, please contact your nearest Avidyne dea…
Weight on Wheels (WOW) Interface for Helicopter Installations.
Because a Helicopter commonly operates at speeds <35 Knots. The Pseudo Weight on Wheels (WOW) GPS Derived Squat Switch Input cannot be utilized to determine the Aircraft is on the ground. On a helicopter, the use of either a Squat Switch, Collective Switch or Airspeed Switch is required. For Helicopter Installations…
Maintenance Mode PIN removal file and instructions
Starting with IFD4XX/5XX SW release 10.2.4.1 there is an option to "Password Protect" the configuration of the IFD in maintenance mode by setting a PIN which will prevent changing the configuration pages with the exception of the WiFi page and Bluetooth page. You can use the attached file to remove the pin. Once the…
3.55 L3 NGT9000 Interface with Avidyne IFD5XX/4XX
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. The NGT9000/IFD5xx/4xx interface FAA Approved Data can be found in the NGT9000 STC Installation Manual. …
