You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.

Showing articles from IFD tag

IFD Interfaced with Garmin G500/G600 (including TXi)

Intro to IFD interfaces with EFIS systems IFD Interfaced with Garmin G500/G600 Troubleshooting IFD interfaces with EFIS systems Main ARINC429 Config Page VOR/ILS429 Config Page

I can't put my IFD5XX/4XX into Maintenance Mode from Flight Mode.

If you ever need to place an IFD5XX/4XX Series Navigator into maintenance mode you can accomplish by either selecting the Download Logs LSK from the AUX>SYS>Status Software Page or from the AUX>SYS> Status Databases Page (Example Below). If the Download Logs or Update Databases selection is not populated (Example …

IFD Interfaced with Aspen EFD1000

Intro to IFD Interfaces with EFIS Systems IFD Interfaced with Aspen EFD1000 Troubleshooting IFD Interfaces with EFIS Systems Main ARINC429 Config Page VOR/ILS 429 Configuration Page

IFD Displays "Configuration Error- IFD Requires Service " After Software Update

It has been reported on rare occasions that this CAS message appears in Flight Mode after performing a software upgrade: IFDs may show all indications of a successful software update; no red or dashed checksums, all previous configurations in maintenance mode are present, etc. However, this error may still pre…

IFD Interfaced with Garmin GTX345 Transponder

IFD Interfaced with Garmin GTX345 Transponder Troubleshooting ADS-B Traffic Interfaced with the IFD RS232 Config Page

IFD5xx / IFD4xx interfaced to a Bendix King EFS 40 / 50

The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data.  Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. The following settings will affect the ability of the EFS 40/50 to display GPS vertical guidance from the IFD s…

I can't put my IFD5XX/4XX into Maintenance Mode from Flight Mode.

If you ever need to place an IFD5XX/4XX Series Navigator into maintenance mode you can accomplish by either selecting the Download Logs LSK from the AUX>SYS>Status Software Page or from the AUX>SYS> Status Databases Page (Example Below). If the Download Logs or Update Databases selection is not populated (Example …

IFD Interfaced with Garmin G5 system

Intro to IFD interfaces with EFIS systems IFD Interfaced with Garmin G5 system Troubleshooting IFD interfaces with EFIS systems Main ARINC429 Config Page VOR/ILS ARINC429 Config Page

scroll to top icon