IFD and GFC500/600 Autopilot Compatibility
IFDs with GFC500 Autopilots Currently, here is the list of IFD interfaces with EFIS systems and GFC500: 1. IFD + Aspen EFD/MAX + GFC500 2. IFD + Garmin G3X + GFC500 3. IFD + Garmin GI275 + GFC500 4. Issues identified in some IFD + Garmin G5 + GFC500 installations are being addressed in software release 10.3.2.2…
IFD interface with IFD100 and ForeFlight 10.3 software
The following video explains how to connect your iPad using IFD100 and or Foreflight with your IFD, please note that this video only applies to IFDs with software 10.3.1.2:
Aspen ACU air data to IFD
When an IFD is interfaced with an Aspen, if it has an ACU installed and NOT an ACU 2 , then the labels for air data are stripped out: To get around that, you will need to bypass the ACU with additional wiring to the IFD per their installation manual:
MyAvidyne Users Guide
Account Types The MyAvidyne portal includes the following public account types. Primary Customers, OEMs, and Dealers can be created from the registration page, and Umbrella users can be added to other accounts through the Settings tab in the portal. * Primary Customer (also called “Pilot” on the registrati…
IFD Radar Configuration page
RADAR CONFIGURATION PAGE: Select Radar Model Type Select LIO number Based on IFD Unit ID #1 or #2. Max range, Scan arc, beam width, and 429 stabilization will be unique to the installation. Notes: 1. If the LIO number does not match the IFD Unit ID you will not be able to calibrate the Radar. 2. If you have…
IFD interfaced with ART2000/2100
The RDR 2000 system can be configured at installation to include the Target Alert feature (Configuration Module CM2000 must be configured properly). The purpose of the feature is to alert the pilot to the presence of a significant weather cell that exists beyond the currently selected range. For this mode to be activ…
Clearing IFD100 CAS Messages Does Not Clear on the IFD with AviOS10.3
With AviOS10.3, acknowledging CAS messages on IFD100 do not cause the same CAS message to clear on the panel-mounted IFD. Prior to AviOS 10.3, clearing the CAS on IFD100 would cause the same message to clear on the IFD, and vice versa. This is not a bug or a glitch, but rather a circumstance of the new security …
IFD Interfaced with Shadin MinFlo
Troubleshooting Fuel flow Interfaces RS232 Config Page
IFD Interfaced with Shadin Digi Flo systems
Troubleshooting Fuel Flow Systems RS232 Config Page
IFD Interfaced with Shadin FADC
Troubleshooting Fuel flow Systems RS232 Config Page
