Entegra EX5000 - Tips
New the the Entegra MFD EX5000 (or EX500/EX600)? All inquires for the EX5000 MFD should be directed to Avidyne ([email protected]). All Inquires for the EX500/EX600 should be directed to Duncan Aviation . What software do I have on my MFD? - take a picture of the AUX tab, If you have a setup tab, this eq…
EMAX Logs
From the Pilots Guide 600-00108-003 Rev01 - EMax Total Engine Management The EMax™ Total Engine Management is an optional feature that provides the following information about the health of your engines: * Extended Fuel Flow information on the Engine Page and Map Page data blocks. * Initial Usable Fuel Page to …
Entegra EX5000 MFD USB Port
The MFD does not have the proper current to charge external devices; such as iPad's or phones. The MFD was created prior to the inception of these external devices. The MFD USB Port is designed for the following: - uploading Jeppesen NavData and Charts - downloading EMAX data Pilots can easily test the port …
EX5000 MFD USB Drive
Remember to look at the description when purchasing USB Drives. The Sandisk/M-Systems joint venture creating the U3 Smart Drive (2nd photo) has the U3 Launchpad executable file installed, which cannot be deleted (1st photo, footnote #1). The MFD can see the executable file, will ignore any/all updates by skipping the…
Formatting 2GB USB to FAT
updated 9/18/2024 2GB USB Drives for the MFD (EX5000/EX500/EX600), you will need to use a PC to format to FAT (Default), as FAT16 has been removed from most Operating System (OS) software. If you have FAT16 on your OS this may work for now, until your next OS update. - insert the USB into the PC USB port - Open t…
