DFC90/100 Servo Start Up Voltages - Cirrus and Piper
This should be tested using a variable DC power supply, connected as displayed in the image below: Once connected, begin at 0VDC and slowly increase voltage until the servo begins to respond. That will be your "start-up voltage." DFC90 Servo Start Up Voltages Roll Servo should be less than 3VDC Pitch Servo…
Entegra EXP5000 PFD; How to find the serial number and software part number
How to find the serial number and the software part number of the PFD. On Startup, the PFD has a purplish-grey screen, depending on the version of software on the PFD, the Serial Number might be found on that screen If the screen does not have the serial number of the PFD, you will need to retrieve the serial n…
