-
IFD interfaced with ART2000/2100
The RDR 2000 system can be configured at installation to include the Target Alert feature (Configuration Module CM2000 must be configured properly). The purpose of the feature is to alert the pilot to the presence of a significant weather cell that exists beyond the currently selected range. For this mode to be activ…
-
IFD Interfaces with Analog Indicators (CDI/HSI)
IFD's Interfaced with Typical Analog CDI's and HSI's IFD's Interfaced with KI208/KI209 Indicators
-
IFD4XX/5XX Demo Mode When Installed in an Aircraft
You're using demo endpoint of Iframely API commercially. Max-width is limited to 320px. Please get your own API key at Please read the attached Service Information Letter 606-00182-026 and be advised that before putting an IFD4XX or IFD5XX in demo mode when the IFD is installed in an aircraft that you turn off the AD…
-
IFD Interfaced with Avidyne Entegra Systems
Intro to IFD interfaces with EFIS systems IFD Interface with Avidyne Entegra Troubleshooting IFD interfaces with EFIS systems Main ARINC429 Config Page VOR/ILS 429 Config Page
-
IFD - Transponder Interfaces (Training)
This is an embedded <a target="_blank" href=" Office</a> presentation, powered by <a target="_blank" href="
-
IFD Interfaced with AXP340 Transponder
IFD Interfaced with AXP340 Transponder RS232 Config Page
-
IFD Pin Configuration
How to either bypass, or set a pin on the IFD config pages
-
IFD Product Familiarization Training
This is an embedded <a target="_blank" href=" Office</a> presentation, powered by <a target="_blank" href="
-
IFD Main ARINC429 Config Page
Main ARINC429 Config
-
Error Detected "Data Load Not Authorized
If you encounter the following error during a Jeppesen Database update please review the information below. Error Detected "Data Load Not Authorized" Photo from actual customer The navigation, obstacle, and charts databases are downloaded from Jeppesen, using the Jeppesen Distribution Manager (JDM), to a USB…
