IFD interfaced with ART2000/2100
The RDR 2000 system can be configured at installation to include the Target Alert feature (Configuration Module CM2000 must be configured properly). The purpose of the feature is to alert the pilot to the presence of a significant weather cell that exists beyond the currently selected range. For this mode to be activ…
R9 ALTERNATOR SUPPRESSION
On most aircraft we suppress alternator alerts below 1400 RPM. On the Cirrus, at least one alt (# 2) is suppressed below 2000 RPM. On the R9, the Alternator display will show as an Amber color, but does NOT show the associated CAS Message below the above thresholds.
Entegra EXP5000 Yellow MSG displayed
***UPDATE*** October 2022 If you have updated the IFDs to 10.3, you may notice the 'MSG' notification on the PFD will no longer show when the IFDs have an advisory notification (cyan/blue messages from the IFDs). The change was due to pilot feedback. Cautions and Warnings will still display the yellow 'MSG' notific…
FLTA Exclusion Areas
If you experience excessive FLTA alerts during landing then it is likely that the FLTA Exclusion Areas Option is turned off in the IFD5XX/4XX. Let's make sure this is turned on in the USER Options. It's a bit hard to pinpoint in the image but the different shade of yellow is the "exclusion area" where …
I am not receiving FLTA Alerts on my IFD5XX/4XX
I am not receiving FLTA Alerts on my IFD5XX/4XX. 1. Take a look at the Options Enabled on this IFD. Proceed to the AUX> SYS> Status Software Page and ensure the "F500" Option is highlighted Green with White letters. Document his current software version as well. Example Below: 2. Proceed to the AUX> Audio …
