How to get blade serial numbers off the R9 status page
How to get blade serial numbers off the R9 status page Use the .PDF in the attachments.
Entegra EX5000 MFD with Setup tab
Older versions of the Entegra software will not have an AUX tab, the system will have a setup tab as sown in the photo below. Photo #1 To retrieve the serial number of the MFD, power on the MFD, accept all messages and go into flight mode. Navigate to the Setup tab and hold down the L1 and L3 buttons (left side o…
Entegra EXP5000 PFD; How to find the serial number and software part number
How to find the serial number and the software part number of the PFD. On Startup, the PFD has a purplish-grey screen, depending on the version of software on the PFD, the Serial Number might be found on that screen If the screen does not have the serial number of the PFD, you will need to retrieve the serial n…
IFD5xx/4xx Where To Find Unit Serial Number Information
If the IFD is at software release 10.2.6.1 and prior, the serial number can be located in maintenance mode under the Hardware page. The link below will provide instructions on accessing maintenance mode if you are unfamiliar. If the IFD is at software version 10.3.0.2 or later, the serial number can be found in the S…
