EX500 interfacing a Garmin GPS175 via Arinc429
For informational use only. This was done in the field and not tested by Avidyne. We contacted you yesterday with a question about interfacing a Garmin GPS175 to EX500 via ARINC429. This morning, we did a test setup with a GNX375 GPS/XPDR and an EX5000 and got the interface to work. When interfacing a Garmin …
FlightMax 450 - 900 series Jeppesen DVD
Effective December 2018; FlightMax 450 - 900 series Jeppesen DVD (only) Jeppesen alerted subscribers: (see attached) Dear Jeppesen NavData® Subscriber, We regret to inform you Jeppesen and Avidyne will end NavData production and distribution support for the Avidyne Flight Situation Display (FSD). Jeppesen will is…
1/2 3-ATI Displays
1/2 3-ATI displays are now being repaired and supported at Duncan Aviation. Please see contact information below: These units are now repaired/supported by Duncan Aviation. To remove the EX500/600, you will need: Avionics standard 3/32 allen wrench. FSD, ATD150, MHD300, EX500 and EX600 product lines, D98-00001-58…
Avidyne FlightMax EX500 EX600 with GTX345 wiring
The current install manual shows an incorrect connector on the EX500/EX600. The correct connector is P2, not P1, the picture below has been submitted for the Installation Manual to be updated:
