Entegra EX5000 MFD Cylinder Head Temp (CHT)
The Cylinder Head Temperature (CHT) is found on the Engine tab on the MFD. NOTE: not all MFDs will display CHT, this is based on the aircraft type. Please refer to the appropriate Pilot's Guide. For example: The Piper PA28 will show EGT, but not the CHT The Piper PA32 and PA44 will show EGT and CHT
EX5000 MFD Software Release P/N (Piper)
Piper - * Malibu, Meridian, Matrix and Seneca V - 4 knob radar capable (Piper PA46, PA34) Release 6: 530-00180-000 * Release 7.0.2: 530-00195-000 Rev02 * Release 8: 530-00195-010 Rev00 * Release 8.1: 530-00201-000 Rev00 * Release 8.1.1: 530-00201-000 Rev01 Release 8.2.2: 530-00235-000 Rev02 * Warrior, …
Entegra EX5000 MFD AUX versus Setup Tab
On older versions of the MFD software the AUX tab might not be visible, you will see the Setup tab. It is highly recommended that MFDs with older versions of MFD software be updated to 8.1.1.
Entegra EMAX Engine Download (what information is stored?) (Cirrus)
Cirrus : TIME,"LAT","LON","E1","E2","E3","E4","E5","E6","C1","C2","C3","C4","C5","C6","OILT","OILP","RPM","OAT","MAP","FF","USED","AMP1","AMP2","AMPB","MBUS","EBUS"
Entegra EX5000 MFD Not Enough Space
If you are loading Jeppesen Charts and your MFD shows you the message; Not enough space. This is due to the size of the charts you are adding to the MFD. The compact Flash card installed in the MFD is possibly 512MB, and will need to be updated to the 2GB compact flash card. Pilots/owners will need to work with an a…
Entegra EX5000 MFD Charts Update Required message
This is a new message now that January 15, 2020 has passed. It occurs when no charts have been added, and the MFD is programmed for CMAX. This message is only addressing the MFD when charts have never been installed, and the pilot is using a different source (paper, or other device). It is the responsibility of…
MFD Datalink Weather display
Refer to the latest pilots guide for the most accurate information regarding Datalink Weather.
Entegra MFD EX5000 Charts Tab
Frequently asked questions on Charts: 1) I do not use charts on my MFD, I have a Charts Tab, how do I get rid of Update Required (see photo). If Jeppesen Charts are not installed on the MFD, pilots will need to work with their Avionics Shop. A technician from the shop will need to assist in programming the unit…
EX5000 MFD - Changing fuel from gallons to liters
On the initial usable fuel page you see on power up, you should see a button on the left side of the display labeled "Fuel Units". This button can be used to toggle between gallons and liters.
EX5000 Broken Knobs
Knobs for 2 knob EXP5000 or EX5000 850-00214-000 kit (2 knobs in each kit). Individual PNs are 130-00230-000. Knobs for EX500/EX600/EX5000 with Radar 850-00214-001 kit (2 inner and 2 outer knobs in each kit). Individual PNs: Outer knob 130-00231-000. Inner knob 130-00232-000. These knobs can be ordered from our…
