-
TAS-A; Skytrax 6xx-A Micro SD Card Orientation
TAS-A; Skytrax 6xx-A Micro SD Card Orientation
-
TAS-A; Skytrax 6xx-A How to test ADS-B Targets vs Regular TAS targets
You can use the command interface to select what the displays will show. The “targdisp” command selects what traffic is displayed; either ADS-B, TAS or Both. At the command prompt you can use the following commands: Command Description help targdisp Show help for the targdisp command. targdisp …
-
TAS-6xx to Skytrax 6xxA Additional Wiring for GPS Position Data and Comm Port
TAS-A; Skytrax 6xx-A Additional Wiring for GPS Position Data and Comm Port PDF Attachment available in link to the right. -->
-
TAS6xx-A Suppression Testing
See Avidyne Service Bulletin 601-00185-006 which can be downloaded from dealers.avidyne.com
-
TAS-A; Skytrax 6xx-A Wiring for PC Connection Used for Configuration (HyperTerminal)
The TAS-A units do not have the same traditional COM port previously used in 9900BX and TAS6xx series units. For retrofit installations it is recommended to utilize the P1 connector and wiring from the original 9900BX/TAS6xx to the aircraft harness, as the pinout will be pin for pin. There will need to be additio…
-
Release 9 to TAS-A interface with release 9.4
Release 9 to TAS-A interface with release 9.4 Config Tool Selection for TAS-A R9 IFD Control and Display Wiring to TAS-A: * TAS-A RS422 - In: J121-24 (Port4 of 0-5, actually the 3rd RS422 port if you're separating the 4 RS422 ports from the 2 RS232 ports 0-1) * TAS-A RS422 - Out: J121-66 (Port4 of 0-5) R9 IF…
