Some IFD owners have reported their active and standby frequencies are different on startup with AviOS10.3.0.2. Some units are defaulting to 118.200 and 132.650, causing pilots to set their frequencies before takeoff. This can be annoying sometimes, especially at an unfamiliar airport. A software change has been ma…
Percent Power on a Piper Aircraft Flying the aircraft a little rich may not show percent power. The DAU must have good signals from the following: MAP RPM FUEL FLOW OAT PRESSURE ALTITUDE You can verify all but the Pressure Altitude by just insuring you Have them displayed on the MFD Engine Page. The…
Percent Power on a Piper Aircraft Flying the aircraft a little rich may not show percent power. The DAU must have good signals from the following: MAP RPM FUEL FLOW OAT PRESSURE ALTITUDE You can verify all but the Pressure Altitude by just insuring you have them displayed on the MFD Engine Page. The Percent…
% Power display on EX5000 MFD % Power—Indicates the calculated percent of maximum rated power currently being produced by the engine. For SIU equipped aircraft, Percent Power is calculated by the EX5000 based on engine RPM, manifold pressure, outside air temperature, and fuel flow. For DAU-equipped aircraft, the %…
% Power display on EX5000 MFD % Power—Indicates the calculated percent of maximum rated power currently being produced by the engine. For SIU equipped aircraft, Percent Power is calculated by the EX5000 based on engine RPM, manifold pressure, outside air temperature, and fuel flow. For DAU-equipped aircraft, the %…
The MFD does not have the proper current to charge external devices; such as iPad's or phones. The MFD was created prior to the inception of these external devices. The MFD USB Port is designed for the following: - uploading Jeppesen NavData and Charts - downloading EMAX data Pilots can easily test the port …