How to Calibrate an analog OBS input to the IFD
The following does not apply to the KI208A or KI209A indicators. If you get continual messages on the IFD to "Set Course To xxx" and your analog CRS is set correctly, it likely means you need to calibrate your OBS input. You will need to boot the IFD into Mx mode, and toggle to the "Config" tab. From here you wi…
Entegra EXP5000 PFD Software Release Levels
Pre Release 6 : 530-00171-xxx Release 6.0 : 530-00177-xxx Release 6.2: 530-00183-xxx Release 7 : 530-00194-xxx (adds ADU cal capability, and WAAS) Release 8 : 530-00214-xxx
Entegra EXP5000 PFD Software Release Levels
Pre Release 6 : 530-00171-xxx Release 6.0 : 530-00177-xxx Release 6.2: 530-00183-xxx Release 7 : 530-00194-xxx (adds ADU cal capability, and WAAS) Release 8 : 530-00214-xxx In Dual equipped PFD aircraft, it is essential that the PFDs be within the same software release. If a PFD is coming in for service, it wi…
